STEPPING MOTOR
HB 2 PHASE STEPPING MOTOR SERIES:
  
Static Torque:1.7oz.in(12mNm)- 3807oz.in(27Nm ); Nema Size:10,11,14,16,17,23,24,34,43inch
Application:
MachineTool,Engraver,Laser/Flame/Plasma/Water cutting Machine,3-D Printer,Packing Equipment,Semiconductor,Solar,Scaner
PM 2 PHASE SMALL STEPPING MOTOR SERRIES:
 
Static Torque: 96g.cm-2400g.cm;Diameter Size:20mm-55mm
Application:
Instrumentation,airconditioner
HB3 PHASE STEPPING MOTOR SERIES:
  
Static Torque:0.42Nm - 35Nm ;Frame Size:57,85,110,130mm
Application:
MachineTool,Engraver,Laser/Flame/Plasma/Water cutting Machine,3-D Printer,Packing Equipment,Semiconductor,Solar
HB 5 PHASE STEPPING MOTOR SERIES:
Static Torque:0.033Nm - 6.29Nm ;Frame Size:28,42,60,85mm;Step Angle:0.72/0.36 (full/half) degrees/step
Application:
MachineTool,Engraver,Laser/Flame/Plasma/Water cutting Machine,3-D Printer,Packing Equipment,Semiconductor,Solar
SPECIAL STEPPING MOTOR SERIES:
Linear stepping motor
  
Linear Actuator
Stepping Motor with Gearbox
Contact Sales
Stepping Motor with Encoder
Contact Sales
Stepping Motor with Brake
Contact Sales
IP67 Stepping Motor
Contact Sales
CUSTOMERIZED STEPPING MOTOR
We can provide special design service for you,
please contact us local representive.
|
STEPPING DRIVER
Lower-Cost DC Power Input 2 Phase
Microstepping Drive
二相细分驱动器
Cyclone's EM-DC2 microstepping drive is designedfor a 24-80VDC input power requirement and provides current 0.5 to 6.0 Amps peak of current to the motor.
Features
Performance
Designed for use with motor inductance range of
0.5mH–80 mH
Selectable resolution up to 40,000 steps/rev
Auto standby reduces motor current (and heating) at rest
Provides 0.5 Amps to 6.0 Amps (peak)
Single 24-80 VDC power supply input
Compatible with a variety of motors
Physical
Simplified, two-screw mounting
Overall dimensions 45x82x136mm
Convenient configuration DIP switches
Certified as UL-recognized component
CE (LVD & EMC)
Low Cost, Small Package, AC Power Input 2 Phase Microstepping Drive
二相细分驱动器
Cyclone's EM-AC2 is a low-cost, highperformance,
high-reliability 2 phase microstepping drive in a small package. The design of the EM-AC2 provides up to 8.0 Amps of current to the motor and accepts 95-132VAC
power only. All step motors are subject to mid-range instability or oscillations. The EM-AC2 incorporates an anti-resonance circuitry that aggressively and effectively suppresses these oscillations, thus taking advantage of the full capabilities of the
step motor.
Features
Performance
Designed for use with motor inductance of 0.8 mH - 80mH
Selectable resolution up to 40,000 steps/rev
Auto standby reduces motor current (and heating) at rest
Provides 0.5 Amps to 8.0 Amps (peak)； 95-132VAC power supply input
Physical
Simplified, 2-screw mounting
Overall dimensions: 80x146x200mm
Certified as UL-recognized component
Approvals: CE (LVD), and CE (EMC)
Lower-Cost DC Power Input 3 Phase
Microstepping Drive
三相细分驱动器
Cyclone's EM-DC3 microstepping drive is designed for a 12-40VDC input power requirement and provides current 0.5 to 5.8 Amps peak of current to the motor.
Features
Performance
Designed for use with motor inductance range of
0.5mH–80 mH， Selectable resolution up to 60,000 steps/rev
Auto standby reduces motor current (and heating) at rest
Provides 0.5 Amps to 5.8 Amps (peak)
Single 12-40 VDC power supply input
Compatible with a variety of motors
Physical
Simplified, two-screw mounting
Overall dimensions 25x82x136mm
Convenient configuration DIP switches
Certified as UL-recognized component
CE (LVD & EMC)
Low Cost, Small Package, AC Power Input 3 Phase Microstepping Drive
三相细分驱动器
Cyclone's EM-AC3 is a low-cost, high performance,high-reliability 3 phase microstepping drive in a small package. The design of the EM-AC3 provides up to5.2 Amps of current to the motor and accepts 95-132VAC
power only. All step motors are subject to mid-range instability or oscillations. The EM-AC3 incorporates an anti-resonance circuitry that aggressively and effectively suppresses these oscillations, thus taking advantage of the full capabilities of the step motor.
Features
Performance
Designed for use with motor inductance of 0.8 mH - 80mH， Selectable resolution up to 60,000 steps/rev
Auto standby reduces motor current (and heating) at rest
Provides 0.5 Amps to 5.2 Amps (peak)
95-132VAC power supply input
Physical
Simplified, 2-screw mounting
Overall dimensions: 68x146x178mm
Certified as UL-recognized component
Approvals: CE (LVD), and CE (EMC)
DC Power Input 5 Phase
Nanostepping Drive
五相纳米驱动器
EM-NDC5 Driver ( **CE Approved )
5 Phase NanoDrive DC Type Driver Units
A compact package matching most existing motors
24Vdc Supply Input
High Resolution possible ( selectable 500 up to 500,000steps per revolution [ up to 0.00072 deg/step ] )
Extremely Low vibration & No Hunting problems
Maintains High Torque
Low Power consumption
Opto-isolated inputs and outputs
Auto-current down feature
Conforms to CE Standard
|
|
